Ecobuild 2016 : Digital Building Learning Hub Programme

Ecobuild 2016 : Digital Building Learning Hub Programme

Mar 3, 2016 |Richard McPartland

This content is no longer up to date and has been archived.

You may wish to consider searching for newer content

Digital BuildingEcobuild 2016 will see the launch of ‘Digital Building’ a feature area sponsored by Wavin and curated by NBS, bringing together content and innovation around three key themes of  ‘Digital Design, Digital Construction & Digital Performance’.

The theatre will host a variety of BIM talks, case studies and demonstrations in a diverse three-day programme designed to be of interest and practical use to all construction professionals and manufacturers, irrespective of the progress they have made incorporating BIM into their working lives.

 

Ecobuild takes place from 8 to 10 March 2016 at the ExCeL London. The event is free to attend and you can register to visit the exhibition online. externallink

You’ll find the programme (correct as of 17 February) listed below - jump to details for Tuesday, Wednesday or Thursday - and can keep up-to-date with last minute changes and additions at www.ecobuild.co.uk. externallink

Tuesday 8 March 2016

10:30 – 11:15 Digital Building — Open Papers Review
Ian Chapman from NBS presents a session where Building and Ecobuild reveal findings from their review of digital construction practices and future trends, based on research carried out with 250 construction professionals. Topics include BIM adoption, digital investment plans and future technologies.
11:15 – 11:30 Live Product Demo
Featuring NBS Create.
11:30 – 12:15 Practical BIM Advice for Construction Professionals
David Miller from David Miller Architects gives an overview of their BIM journey over recent years and the benefits that have been seen. Dr Stephen Hamil from NBS chairs.
12:15 – 12:30 Live Product Demo
Turner and Townsend, Tom Oulton.
12:30 – 13:15 An Introduction to BIM for Manufacturers
Ian Chapman from NBS will present what BIM means for manufacturers and will share knowledge about digital construction for product manufacturers large and small. The plain speaking presentation will cover topics such as where to start, the pitfalls to avoid and how to ensure that adoption of BIM in your business is a success.
13:15 – 13:30 Live Product Demo
Velux, Simon Inch
13:30 – 14:15 Practical BIM Advice for Manufacturers
Andy Stolworthy from ASSA ABLOY Ltd gives an overview of their BIM journey over recent years and the benefits that have been seen. Ian Chapman from NBS chairs.
14:15 – 14:30 Live Product Demo
Ingleton Wood LLP, Laura Mansel-Thomas
14:30 – 15:15 Co-ordinating BIM though the Project Timeline
Dr Stephen Hamil from NBS looks at how a combination of standardised content and process mixed with technology can result in efficiency and accuracy savings.
15:15 – 15:30 Live Product Demo
Capita, Mike Turpin
15:30 – 16:15 BIM and UK Government
Mark Bew from the UK Government BIM Task Group gives an update on progress on the UK strategy. Dr Stephen Hamil from NBS chairs.
16:15 – 16:30 Live Product Demo
NBS National BIM Library.
16:30 – 17:15 Vectorworks Sponsored Session
‘The Cube’ presentation sets out to explore and demonstrate the key methods of the BIM process and the potential for creative design within it. Boris Bresciani, BIM and Vectorworks Evangelist, is the speaker, Ian Chapman from NBS chairs.

Wednesday 9 March 2016

10:30 – 11:15 Practical BIM Advice for Construction Professionals
Lee Jones from Ideal Standard gives an overview of their BIM journey and this presentation of practical advice will cover aspects such as what motivated Ideal Standard to adopt BIM, the approach they took and why, the process itself, lessons learned and what they've achieved so far. Dr Stephen Hamil from NBS chairs.
11:15 – 11:30 Live Product Demo
NBS National BIM Library.
11:30 – 12:15 An Introduction to BIM for Manufacturers
Ian Chapman from NBS will present what BIM means for manufacturers and will share knowledge about digital construction for product manufacturers large and small. The plain speaking presentation will cover topics such as where to start, the pitfalls to avoid and how to ensure that adoption of BIM in your business is a success.
12:15 – 12:30 Live Product Demo
NBS Create.
12:30 – 13:15 Practical BIM Advice for Manufacturers
Alistair Kell from BDP gives an overview of their BIM journey over recent years and the benefits that have been seen.
13:15 – 13:30 Live Product Demo
Scott Brownrigg, Nigel Rayner
13:30 – 14:15 Co-ordinating BIM through the Project Timeline
Dr Stephen Hamil from NBS looks at how a combination of standardised content and process mixed with technology can result in efficiency and accuracy savings.
14:15 – 14:30 Live Product Demo
NBS Plug-in for Autodesk Revit.
14:30 – 15:15 BIM and UK Government
David Philp from the UK Government BIM Task Group gives an update on progress against the UK strategy. Dr Stephen Hamil from NBS chairs.
15:15 – 15:30 Live Product Demo
NBS Create.
15:30 – 16:15

BRE
BRE's Chief Scientist, Jeremy Watson and BREs Director of BIM, Paul Oakley, give the "architect's perspective" on why BIM Level 2 is much more than a mandatory Government measure. Dr Stephen Hamil from NBS chairs.

16:15 – 16:30 Live Product Demo
NBS National BIM Library.
16:30 – 17:15 RetroBIM: Unlocking Legacy Asset Data
Do you question whether you can trust your legacy data? Is no-one able to answer the question: ‘What is in our existing portfolio?’. The semantic web may hold the answer to making sense of and managing existing asset information. Stephen Crompton of GroupBC discusses how next generation web technology is being applied to deliver a structured view of existing 2D data, without carrying out costly remodelling exercises.

Thursday 10 March

10:30 – 11:15 Co-ordinating BIM through the Project Timeline
Dr Stephen Hamil from NBS looks at how a combination of standardised content and process mixed with technology can result in efficiency and accuracy savings.
11:15 – 11:30 Live Product Demo
NBS Plug-in for Autodesk Revit
11:30 – 12:15 Practical BIM Advice for Manufacturers
Ian Chapman from NBS chairs and Wavin will be sharing their experiences of BIM from a manufacturers perspective including the road to PDT’s; the data challenge; the need for content and most essentially, when to collaborate and when to compete.
12:15 – 12:30 Live Product Demo
NBS National BIM Library
12:30 – 13:15 How BIM is changing the industry
In 2011 the UK Government set out their Construction Strategy which announced the intention to require BIM on all its projects by 2016. Richard, Chief Executive at NBS and chair of the BSI B/555 committee defining the UK BIM standards, will present on both the UK’s BIM journey so far and also what we may expect to see in the coming years.
13:15 – 13:30 Live Product Demo
NBS Create.
13:30 – 14:15 BIM and UK Government
Rob Manning from the UK Government BIM Task Group gives an update on progress against the UK strategy. Dr Stephen Hamil from NBS chairs.
14:15 – 14:30 Live Product Demo
NBS Plug-in for Autodesk Revit.
14:30 – 15:15 BSI's BIM solutions: Enabling construction companies
From BIM standards to training and verification, Andy Butterfield shares how BSI’s BIM solutions enable companies to prove their capability to deliver projects against one of the key BIM standards, PAS 1192-2 for Design & Construction.Dr Stephen Hamil from NBS chairs.

Our latest articles

Uniclass - October 2026 update

Classifying the natural environment

UniclassClassification

Visqueen launches Ultimate Self Adhesive Membrane for hydrocarbon and VOC-contaminated sites

The construction industry faces growing challenges when building on increasingly complex brownfield sites. Alongside the need for effective waterproofing, developers and contractors must now address a wider range of ground contaminants, including hydrocarbons, volatile organic compounds (VOCs), and hazardous ground gases, while maintaining programme efficiency and installation quality. Against this backdrop, Visqueen has expanded its gas protection and waterproofing portfolio with the launch of Visqueen Ultimate Self Adhesive Membrane, a new hydrocarbon and VOC-resistant self-adhesive tanking membrane. Developed as the latest addition to the Visqueen non-foil gas barrier range, the new membrane combines proven gas barrier and waterproofing performance to help specifiers address multiple site challenges with a single solution.

Construction ProductsSponsored

Siderise: Helping to bridge the gap between Gateway 2 approval and on-site fire protection

While the new building safety regime hasn’t fundamentally changed what requirements higher-risk buildings (HRBs) must meet to comply with the Building Regulations, it has significantly increased the breadth, depth and volume of evidence that must be supplied to demonstrate this. As a result, project teams have had to adapt the way they work and even look beyond their roles to understand how their actions may impact the next Dutyholder in the chain. For specifiers, this can include considering what supporting services are offered with life safety-critical elements to enable correct design, installation and maintenance. Early engagement with manufacturer technical specialists can help identify any practical challenges that may arise onsite. Then, during construction, these services can help support the translation of design intent into reality so that buildings are safe for occupation.

Construction ProductsSponsored