Half-baked election coverage leaves construction industry scratching its head

Half-baked election coverage leaves construction industry scratching its head

Jul 3, 2024 |NBS |2 Minute Read

With the UK off to the polls on 4 July, question marks over key issues remain a sticking poin.
t for the built environment. NBS and Glenigan (part of Byggfakta Group) surveyed construction professionals to identify the major issues missing from the election coverage.

It found that, overwhelmingly, the construction industry has been left dissatisfied by lacklustre manifestos. Many of the issues plaguing the sector have been left out of the conversation altogether by political parties. Only 3% of respondents believed that the election coverage had addressed all the key issues impacting the sector, pointing to widespread frustrations.

  • Over a third of respondents emphasised the need for more building materials to be produced domestically, reducing the reliance on imports, and bolstering local economies.
  • One in three participants identified potholes and the broader challenge of crumbling infrastructure as areas needing more focus. SMEs with 1-9 employees and those with annual turnovers under £50 million were notably concerned, highlighting the potential impact on transportation and logistics.
  • Skills shortages remain a critical issue, with a quarter of respondents agreeing that more needs to be done to attract and train talent.
  • A quarter of those surveyed flagged late payment culture as a key challenge. Although Labour has said it would take action to ensure small businesses are paid on time, and the Tories have vowed to improve enforcement of the Prompt Payment Code, more clarity is needed around how enforcement would be rolled out, protecting the cash flow and financial stability of smaller firms and suppliers.
  • Around a quarter of industry professionals urged the government to streamline planning processes, a concern shared across the board in terms of company size and turnover.

Commenting on the findings, Russell Haworth, CEO UKI of Byggfakta Group, said: “The construction sector has struggled through the past few years, challenged by high interest rates, a housing market slowdown, and weak UK economic growth. This has been exacerbated by a lack of long-term policy vision, not helped by the fact that 25 construction ministers have served in post since the turn of the century.

"I hope the next administration, whichever party it is, appoints MPs to these posts and keeps them there to ensure they understand the challenges facing the sector and maintain consistency to deliver crucial reforms, from digital transformation to addressing chronic labour shortages.

“We urgently need to elevate these offices from junior positions to ones that attend the Cabinet, ensuring construction has a voice where it matters. For an industry that employs around 1 in 10 of the UK workforce and is such a major economic driver, construction is too often seen as an afterthought by political parties.”

The survey, which included responses from 505 industry professionals across various company sizes and turnover brackets, posed the question: What’s missing from the election coverage?

Our latest news

Visqueen supports one of the first Gateway 2 approvals under the Building Safety Act

The Dyecoats development in Leeds marks a major milestone for the UK housing sector. The £100 million flagship Latimer Homes scheme being delivered by GRAHAM is one of the first high-rise new-build projects in the country to achieve Building Safety Act Gateway 2 approval, a crucial pre-construction sign-off confirming that the design meets all safety and regulatory requirements before work begins on site.

Building Safety ActSponsored

Five questions to ask when specifying insulated panels

Selecting an insulated panel system for an industrial building should start with the building and application requirements.

Design and SpecificationSponsored

NBS and BDP join forces to improve generic carbon data in construction

Today, NBS (part of Hubexo), the platform for connected construction information, announces a long-term strategic partnership with BDP, a major global multidisciplinary practice of architects, designers, engineers and urbanists. The partnership recognises BDP's integral role in the development of NBS LCA, a new life-cycle carbon assessment platform providing professionals with high-quality, reliable and easy-to-use carbon data to ensure accurate tracking as construction projects evolve. BDP's primary contribution to NBS LCA has been the development of more than 1,300 pre-calculated generic assemblies, covering the most commonly used building fabric elements alongside key concrete and steel structural elements. These assemblies provide whole-element carbon data, giving designers consistent, UK-relevant carbon benchmarks from the earliest stages of project design. Users can easily and instantly apply carbon rates to a range of pre-configured common building elements, including walls, floors, and roofs. Developed by BDP and NBS, the assemblies remove the need for designers to manually build up material layers or calculate individual components at the concept stage. This saves significant time and effort, enabling proportionate and responsible carbon evaluation early in the design process, when decisions have the greatest impact on a project's overall carbon footprint. BDP also participated in collaborative workshops that directly informed the development of NBS LCA, helping to shape a tool that is practical, accessible and aligned with real-world UK construction workflows. Dr Lee Jones, Head of Sustainability at Hubexo, said: “BDP's contribution to NBS LCA has been invaluable. Their depth of project experience and technical knowledge has directly shaped the generic assemblies at the heart of the platform. These assemblies give designers a reliable, UK-relevant starting point for carbon assessment, without the burden of building everything from scratch. This is exactly the kind of collaboration that moves the industry forward, and we're proud to be working with BDP on a long-term basis.” Julia Yao, Associate, Sustainability Consultant at BDP, said: “Carbon assessment needs to be embedded in design from day one, not bolted on at the end. Working with NBS to develop its LCA product has been a genuine opportunity to put that principle into practice. The generic assemblies we developed draw on real project data and are designed to give designers meaningful, actionable carbon information at the concept stage. We're delighted to see them at the core of a platform that will be used across the industry.” With the UK Government outlining its commitment to responsible carbon reporting through its Carbon Budget and Growth Delivery Plan, professionals need reliable, easy-to-use tools to assess and report embodied carbon. NBS LCA addresses this need by integrating carbon calculations with live design work, drawing on structured data from Circular Ecology's ICE Database and more than 12,500 verified, specification-ready construction products with Environmental Product Declarations (EPDs) from NBS Source and ECO Portal. Over the coming months, NBS and BDP will continue to develop their partnership, with a shared commitment to improving the quality and accessibility of carbon data for construction professionals across the UK. NBS LCA is available now, with flexible subscriptions designed for all professionals. For more information, visit the website here.

Product update