NBS survey reveals an increase in construction industry disputes

Oct 1, 2013 |NBS |2 Minute Read

October 2013

 

A survey of the UK construction industry by NBS, has revealed an increase in the number of disputes over the last 12 months.

Undertaken with the help of the membership of more than 20 industry bodies, the 2013 NBS National Construction Contracts and Law Survey  of over 1,000 clients, contractors and consultants found that 30% had been involved in one or more contract entering into dispute in the last 12 months compared to 24% in the previous year, with 7% reporting that they had been involved in three or more disputes.

The perception that the tough economic climate has forced parties to be more adversarial is backed up by nearly half of those surveyed saying that the number of disputes have increased (and fewer than ten per cent that are saying they have decreased), with consultants reporting that over the past few years the number of non-paying clients, and clients going bankrupt, has dramatically increased.

It is also clear from the NBS survey that many disputes involve large sums of money and have a significant effect on the construction process.

Half of the disputes reported had a value greater than a quarter of a million pounds, whilst 13% had a value in excess of £5 million.

70% of disputes occurred during the construction process, the remainder happening after practical completion, with 17% of disputes resulting in work being stopped or suspended.

45% of those who entered into dispute in 2012 had at least one on-going dispute at the time they completed the survey (June and July 2013).

Disputes most commonly arose between the client and main contractor (81%) with the assessment of delay and extension of time and contract variations cited as the primary causes of contention.

The survey also revealed how international work (through UK-managed contracts) brought its own issues with cultural differences coming top followed by risk distribution, unfamiliar contract forms, security of payment and language issues, listed as challenging issues for at least a quarter of those involved in international contracts.

Those calling for greater collaboration in the construction industry will also be disappointed to learn that nearly a half of respondents did not adopt any collaborative techniques in 2012, and only 10% did so for all projects.

Almost half of those questioned felt that greater collaboration between all parties was helped by the adoption of BIM (only 6% didn't) but it is still not normal practice for BIM to be referenced in contracts, with fewer than a quarter agreeing that they referenced BIM, or have adopted BIM, in their contracts.

Richard Waterhouse, Chief Executive of NBS said:

"Further work is required to develop knowledge on how to improve and create effective contractual mechanisms that provide the framework for collaboration in construction projects

While disputes appear to be increasing, use of industry standard contract forms is not. Bespoke contracts and appointment arrangements remain prevalent. The survey gives us no evidence to support the view that bespoke contracts are a way of avoiding dispute."

Our latest news

Visqueen supports one of the first Gateway 2 approvals under the Building Safety Act

The Dyecoats development in Leeds marks a major milestone for the UK housing sector. The £100 million flagship Latimer Homes scheme being delivered by GRAHAM is one of the first high-rise new-build projects in the country to achieve Building Safety Act Gateway 2 approval, a crucial pre-construction sign-off confirming that the design meets all safety and regulatory requirements before work begins on site.

Building Safety ActSponsored

Five questions to ask when specifying insulated panels

Selecting an insulated panel system for an industrial building should start with the building and application requirements.

Design and SpecificationSponsored

NBS and BDP join forces to improve generic carbon data in construction

Today, NBS (part of Hubexo), the platform for connected construction information, announces a long-term strategic partnership with BDP, a major global multidisciplinary practice of architects, designers, engineers and urbanists. The partnership recognises BDP's integral role in the development of NBS LCA, a new life-cycle carbon assessment platform providing professionals with high-quality, reliable and easy-to-use carbon data to ensure accurate tracking as construction projects evolve. BDP's primary contribution to NBS LCA has been the development of more than 1,300 pre-calculated generic assemblies, covering the most commonly used building fabric elements alongside key concrete and steel structural elements. These assemblies provide whole-element carbon data, giving designers consistent, UK-relevant carbon benchmarks from the earliest stages of project design. Users can easily and instantly apply carbon rates to a range of pre-configured common building elements, including walls, floors, and roofs. Developed by BDP and NBS, the assemblies remove the need for designers to manually build up material layers or calculate individual components at the concept stage. This saves significant time and effort, enabling proportionate and responsible carbon evaluation early in the design process, when decisions have the greatest impact on a project's overall carbon footprint. BDP also participated in collaborative workshops that directly informed the development of NBS LCA, helping to shape a tool that is practical, accessible and aligned with real-world UK construction workflows. Dr Lee Jones, Head of Sustainability at Hubexo, said: “BDP's contribution to NBS LCA has been invaluable. Their depth of project experience and technical knowledge has directly shaped the generic assemblies at the heart of the platform. These assemblies give designers a reliable, UK-relevant starting point for carbon assessment, without the burden of building everything from scratch. This is exactly the kind of collaboration that moves the industry forward, and we're proud to be working with BDP on a long-term basis.” Julia Yao, Associate, Sustainability Consultant at BDP, said: “Carbon assessment needs to be embedded in design from day one, not bolted on at the end. Working with NBS to develop its LCA product has been a genuine opportunity to put that principle into practice. The generic assemblies we developed draw on real project data and are designed to give designers meaningful, actionable carbon information at the concept stage. We're delighted to see them at the core of a platform that will be used across the industry.” With the UK Government outlining its commitment to responsible carbon reporting through its Carbon Budget and Growth Delivery Plan, professionals need reliable, easy-to-use tools to assess and report embodied carbon. NBS LCA addresses this need by integrating carbon calculations with live design work, drawing on structured data from Circular Ecology's ICE Database and more than 12,500 verified, specification-ready construction products with Environmental Product Declarations (EPDs) from NBS Source and ECO Portal. Over the coming months, NBS and BDP will continue to develop their partnership, with a shared commitment to improving the quality and accessibility of carbon data for construction professionals across the UK. NBS LCA is available now, with flexible subscriptions designed for all professionals. For more information, visit the website here.

Product update