UK's largest ever BIM survey reveals growth in latest adoption figures

UK's largest ever BIM survey reveals growth in latest adoption figures

Mar 12, 2013 |NBS |2 Minute Read

Press Release
13 March 2013

Results from the annual industry-wide BIM survey, undertaken by NBS, have provided the most comprehensive and up to date picture of BIM (Building Information Modelling) implementation within the UK's construction industry.

Now in its third year, the NBS National BIM Survey was conducted between December 2012 and February 2013 and received a record response. More than 1,350 professionals took part, representing a range of business sizes and disciplines from across the industry including architecture, engineering and surveying, making this the most comprehensive piece of research into BIM to be undertaken in the UK.

Against a backdrop of growing industry interest in BIM over the last year, nearly three quarters (71%) of respondents to the NBS survey agreed that BIM represents the 'future of project information' and 39% confirmed that they were now actually using BIM.

However, almost two years after the publication of the UK Construction Strategy, in which BIM plays a central role, fewer than half of respondents are aware of the different levels of BIM, despite Level 2 being mandatory on all Government projects by the end of 2016.

Although the numbers using BIM continue to grow, a lack of clarity around the subject was identified by the survey as an obstacle to more rapid adoption, with 74% agreeing that 'the industry is 'not clear enough on what BIM is yet'. Only around one-third of those questioned claim to be 'very' or 'quite' confident in their BIM knowledge and skills.

Despite the uncertainty around the subject, the survey once again supported the view that the greater use of BIM is unstoppable with 73% agreeing that clients will increasingly insist on its use, 66% saying the same about contractors and 51% confirming that the Government 'is on the right track with BIM'.

Of those who have adopted BIM, more than half believe that the introduction of BIM has resulted in greater cost efficiencies whilst three-quarters report increased coordination of construction documents. Improved productivity due to easy retrieval of information and better quality visualisations were other gains. A mere 6% would turn back the clock and regret the introduction of BIM to their organisations.

Commenting on the survey, Dr Stephen Hamil, Director of Design and Innovation at RIBA Enterprises, said:

"Digital construction is here to stay. The annual trends we are observing in the NBS BIM surveys clearly show this. However, the true benefits of BIM will not be realised until the industry focuses on clear requirements around structured information. This has been the Government's clear and consistent message. This must now spread to all those involved in the UK construction industry."

The full NBS National BIM Survey will be available at www.thenbs.com.

Our latest news

Visqueen supports one of the first Gateway 2 approvals under the Building Safety Act

The Dyecoats development in Leeds marks a major milestone for the UK housing sector. The £100 million flagship Latimer Homes scheme being delivered by GRAHAM is one of the first high-rise new-build projects in the country to achieve Building Safety Act Gateway 2 approval, a crucial pre-construction sign-off confirming that the design meets all safety and regulatory requirements before work begins on site.

Building Safety ActSponsored

Five questions to ask when specifying insulated panels

Selecting an insulated panel system for an industrial building should start with the building and application requirements.

Design and SpecificationSponsored

NBS and BDP join forces to improve generic carbon data in construction

Today, NBS (part of Hubexo), the platform for connected construction information, announces a long-term strategic partnership with BDP, a major global multidisciplinary practice of architects, designers, engineers and urbanists. The partnership recognises BDP's integral role in the development of NBS LCA, a new life-cycle carbon assessment platform providing professionals with high-quality, reliable and easy-to-use carbon data to ensure accurate tracking as construction projects evolve. BDP's primary contribution to NBS LCA has been the development of more than 1,300 pre-calculated generic assemblies, covering the most commonly used building fabric elements alongside key concrete and steel structural elements. These assemblies provide whole-element carbon data, giving designers consistent, UK-relevant carbon benchmarks from the earliest stages of project design. Users can easily and instantly apply carbon rates to a range of pre-configured common building elements, including walls, floors, and roofs. Developed by BDP and NBS, the assemblies remove the need for designers to manually build up material layers or calculate individual components at the concept stage. This saves significant time and effort, enabling proportionate and responsible carbon evaluation early in the design process, when decisions have the greatest impact on a project's overall carbon footprint. BDP also participated in collaborative workshops that directly informed the development of NBS LCA, helping to shape a tool that is practical, accessible and aligned with real-world UK construction workflows. Dr Lee Jones, Head of Sustainability at Hubexo, said: “BDP's contribution to NBS LCA has been invaluable. Their depth of project experience and technical knowledge has directly shaped the generic assemblies at the heart of the platform. These assemblies give designers a reliable, UK-relevant starting point for carbon assessment, without the burden of building everything from scratch. This is exactly the kind of collaboration that moves the industry forward, and we're proud to be working with BDP on a long-term basis.” Julia Yao, Associate, Sustainability Consultant at BDP, said: “Carbon assessment needs to be embedded in design from day one, not bolted on at the end. Working with NBS to develop its LCA product has been a genuine opportunity to put that principle into practice. The generic assemblies we developed draw on real project data and are designed to give designers meaningful, actionable carbon information at the concept stage. We're delighted to see them at the core of a platform that will be used across the industry.” With the UK Government outlining its commitment to responsible carbon reporting through its Carbon Budget and Growth Delivery Plan, professionals need reliable, easy-to-use tools to assess and report embodied carbon. NBS LCA addresses this need by integrating carbon calculations with live design work, drawing on structured data from Circular Ecology's ICE Database and more than 12,500 verified, specification-ready construction products with Environmental Product Declarations (EPDs) from NBS Source and ECO Portal. Over the coming months, NBS and BDP will continue to develop their partnership, with a shared commitment to improving the quality and accessibility of carbon data for construction professionals across the UK. NBS LCA is available now, with flexible subscriptions designed for all professionals. For more information, visit the website here.

Product update