Association for Specialist Fire Protection

Formed in 1975, the Association for Specialist Fire Protection currently represents the major U.K. based specialist manufacturers and installers of structural passive fire protection systems. They produce technical information to ensure built in fire protection in buildings.

Kingsley House, Ganders Business Park
Kingsley
Bordon
Aldershot
GU35 9LU
UK
Website: www.asfp.org.uk
Email: info@asfp.org.uk
Tel: 01420 471612

Documents by this publisher

Page 1 of 1

Series details Title Year Status
ASFP on-site guide to installing fire-stopping 2016 Green
Ensuring best practice for passive fire protection in buildings. 2nd edition 2014 Green
Ensuring best practice for passive fire protection in buildings (No longer current but cited in Building Regulations) 2004 Amber
Fire protection for structural steel in buildings. 3rd edition 2002 Red
Fire protection for structural steel in buildings. 5th edition. (Volume 1 of 2). (Yellow book) 2014 Green
Fire protection for structural steel in buildings (Yellow book). 3rd edition (Revised June 2004) 2004 Red
Fire protection for structural steel in buildings (Yellow book). 4th edition (Revised April 2008) 2007 Red
Fire protection for structural steel in buildings (Yellow book). 4th edition (Revised May 2007) 2007 Red
Fire protection for structural steel in buildings (Yellow book). Volume 1 Sections 1-9. 4th edition (Revised June 2010) (No longer current but cited in Building Regulations) 2007 Amber
Fire protection for structural steel in buildings (Yellow book). Volume 1 Sections 1-9. 4th edition (Revised October 2009) 2007 Red
Fire protection for structural steel in buildings (Yellow book). Volume 2: Part 1: Boards. Section 10:1 Product data sheets - Boards. 4th edition (Revised March 2010) 2007 Green
Fire protection for structural steel in buildings (Yellow book). Volume 2: Part 2: Casings, blankets and circular pre-formed products. Section 10:2 Product data sheets. 4th edition (Revised March 2010) 2007 Green
Fire protection for structural steel in buildings (Yellow book). Volume 2: Part 3: Sprayed non reactive coatings. Section 10:3 Product data sheets. 4th edition (Revised June 2010) 2007 Red
Fire protection for structural steel in buildings (Yellow book). Volume 2: Part 3: Sprayed non reactive coatings. Section 10:3 Product data sheets. 4th edition (Revised August 2017) 2007 Green
Fire protection for structural steel in buildings (Yellow book). Volume 2: Part 3: Sprayed non-reactive coatings. Section 10:3 Product data sheets. 4th edition (Revised Feb 2013) 2007 Amber
Fire protection for structural steel in buildings (Yellow book). Volume 2: Part 4: Sprayed reactive intumescent coatings. Section 10:4. 4th edition (Revised June 2010) 2007 Green
Fire protection for structural steel in buildings (Yellow book). Volume 2 Part 1 Section 10:1 List of product data sheets - boards. 4th edition (Revised October 2009) 2007 Red
Fire protection for structural steel in buildings (Yellow book). Volume 2 Part 2 Section 10:2 List of product data sheets - casings/blankets circulars. 4th edition (Revised October 2009) 2007 Red
Fire protection for structural steel in buildings (Yellow book). Volume 2 Part 3 Section 10:3 List of product data sheets - sprayed non reactive coatings. 4th edition (Revised October 2009) 2007 Red
Fire protection for structural steel in buildings (Yellow book). Volume 2 Part 4 Section 10:4 List of product data sheets - sprayed reactive intumescent coatings. 4th edition (Revised October 2009) 2007 Red
Fire protection for structural steel in buildings Fire protection for structural steel in buildings (2nd edition - revised. 1992) (Withdrawn) 1992 Red
Fire protection of timber floors 1993 Red
Fire rated and smoke outlet ductwork - an industry guide to design and installation (Blue book) 2000 Red
Fire rated non-loadbearing partitions (Purple book) 2003 Red
Fire resisting ductwork - an industry guide to design and installation (Blue book). 2nd edition (Withdrawn) 2007 Amber
Fire resisting ductwork - classified according to BS EN 13501 Parts 3 and 4 - European version (Blue book). 1st edition 2009 Red
Fire resisting ductwork - classified according to BS EN 13501 Parts 3 and 4 - European version (Blue book). 1st edition 2010 Green
Fire resisting ductwork - tested to BS 476 Part 24. 3rd edition. Volume 1 of 2 (Blue book) (British Standard version) 2016 Green
Fire resisting ductwork - tested to BS 476 Part 24. 3rd edition. Volume 2 of 2 - product data sheets (Blue book) (British Standard version) 2016 Green
Fire resisting ductwork - tested to BS 476 Part 24. 3rd edition. Volume 3 of 3 - rules for assessments (Blue book) (British Standard version) 2017 Green
Fire resisting ductwork - tested to BS 476 Part 24 (Blue book). British Standard version. 2nd edition 2007 Red
Fire resisting ductwork - tested to BS 476 Part 24 (Blue book). British Standard version. 2nd edition (Withdrawn) 2011 Amber
Fire resisting non loadbearing partitions (Purple book) 2007 Red
Fire resisting partitions: a guide to internally framed non load bearing partitions. 2nd edition (Purple book) 2010 Green
Fire stopping: Linear joint seals, penetration seals and small cavity barriers: 3rd party certificated products (Red book). 3rd edition 2011 Amber
Fire stopping: Linear joint seals, penetration seals and small cavity barriers: 3rd party certified products (Red book). 3rd edition 2009 Red
Fire stopping: Linear joint seals, penetration seals and small cavity barriers: 3rd party certified products (Red book). 3rd edition 2009 Red
Fire stopping and penetration seals for the construction industry (Red book). 2nd edition (No longer current but cited in Building Regulations) 2004 Amber
Fire stopping and penetration seals for the construction industry (reprint) 1993 Red
Fire stopping and penetration seals for the construction industry - Systems data sheets. 2nd edition 2004 Amber
Fire-stopping: Linear joint seals, penetration seals and cavity barriers 4th edition. Red book (Fire-stopping) 2016 Green
Guidance on the classification for reaction to fire performance of fire retardant coating systems: enhancing the fire performance of surfaces in buildings (Orange book) 2008 Amber
Guidance on the classification for reaction to fire performance of fire retardant coating systems: enhancing the fire performance of surfaces in buildings (Orange book) 2009 Green
Guide to inspecting passive fire protection for fire risk assessors 2012 Green
Have you heard about the regulatory reform (fire safety) order? 2006 Amber
Industry guide to the design for the installation of fire and smoke resisting dampers (Grey book) (No longer current but cited in Building Regulations) 2005 Amber
Over cladding of thin film intumescents on steel sections advisory notice 2005 Red
Overcladding of reactive coatings on structural steel sections 2007 Red
Supplement to 2nd edition (revised) Fire protection for structural steel in buildings (Withdrawn) 1994 Red
Volume 1: Fire dampers (European standards) E (integrity) and ES (integrity and leakage) classified. As used in ventilation systems to maintain fire compartments and/or to protect means of escape from buildings. Guidance on EN fire testing, classification, application and installation. Volume 1: EN fire dampers. (Grey book). 2nd edition 2010 Red
Volume 1: Fire dampers (European standards) E (integrity) and ES (integrity and leakage) classified. As used in ventilation systems to maintain fire compartments and/or to protect means of escape from buildings. Guidance on EN fire testing, classification, application and installation. Volume 1: EN fire dampers. (Grey book). 2nd edition 2011 Green
ANO 1 Safe use of horizontal fire stopping: avoiding accidents and damage 2010 Red
ANO 1 Safe use of horizontal fire stopping: avoiding accidents and damage 2012 Green
ANO 2 Firestopping of combustible pipes with an internal diameter of 40 mm or less 2010 Green
ANO 3 Joint ASFP - BCF advisory notice 2010 Green
ANO 4 Test and assessment procedures for circular solid rods protected with intumescent coatings 2010 Green
ANO 5 Yellow book tables 18 and 19 and cellular beams 2012 Green
ANO 6 Use of firestopping components from different manufacturers/systems 2014 Green
ANO 7 Horizontal linear gap seals used in curtain walling systems 2014 Green
ANO 8 Issues surrounding service support centres 2014 Green
ANO 9 Selection of fire seal materials to amend or refurbish existing non-reusable service penetration seals 2015 Green
ANO 10 'Framing out' of drywall partitions 2016 Green
PUB 160 Structural fire design: off site applied thin film intumescent coatings - part 1: design guidance and part 2: model specification. 2nd edition 2005 Red
TGD 001 Code of practice for the use of sprayed mineral wool for fire protection of concrete floors: To the requirements of BS 8110: Part 2: 1985 2008 Red
TGD 001 Code of practice for the use of sprayed mineral wool for fire protection of concrete floors: To the requirements of BS 8110: Part 2: 1985 (Withdrawn) 2010 Red
TGD 002 Code of practice for the use of sprayed mineral coatings for the fire protection of structural steel: Based on BS 8202 Part 1 for the mechanical retention of sprayed mineral coatings 2008 Red
TGD 002 Code of practice for the use of sprayed mineral coatings for the fire protection of structural steel: Based on BS 8202 Part 1 for the mechanical retention of sprayed mineral coatings 2010 Green
TGD 004 Code of practice for the fire protection of roof components of portal framed buildings and secondary structural steelwork: To be revised in regard to latest Approved Document B of Building Regulations 2000 2008 Red
TGD 004 Code of practice for the fire protection of roof components of portal framed buildings and secondary structural steelwork: To be revised in regard to latest Approved Document B of Building Regulations 2000 (Withdrawn) 2010 Red
TGD 005 Guide to class 0 and class 1: As defined in UK Building Regulations 2008 Red
TGD 005 Guide to class 0 and class 1: As defined in UK Building Regulations 2010 Green
TGD 008 Code of practice for junctions between different fire protection systems when applied to load bearing structural steel elements 2008 Red
TGD 008 Code of practice for junctions between different fire protection systems when applied to load bearing structural steel elements 2010 Green
TGD 009 Code of practice for the fire protection of steel beams with web openings 2008 Red
TGD 009 Code of practice for the fire protection of steel beams with web openings (March 2010 update) (Withdrawn) 2008 Red
TGD 010 Code of practice for the refurbishment and upgrading of fire protection of structural steelwork 2008 Green
TGD 011 Code of practice for the specification and on-site installation of intumescent coatings for fire protection of structural steelwork 2010 Amber
TGD 011 Code of practice for the specification and on-site installation of intumescent coatings for fire protection of structural steelwork 2014 Green
TGD 013 Code of practice for the over-cladding of reactive coatings when used as fire protection to steel structural sections 2010 Green
TGD 014 Code of practice for the installation and inspection of board systems for the fire protection of structural steel work 2009 Green
TGD 015 Code of practice for the installation and inspection of sprayed non-reactive coatings for the fire protection of structural steelwork 2009 Green
TGD 016 Code of practice for the off-site applied thin film intumescent coatings 2010 Green
TGD 017 Code of practice for the installation and inspection of fire stopping systems in buildings: linear joint seals, penetration seals, small cavity barriers 2013 Green
TGD 018 Code of practice for the installation and inspection of fire resisting duct systems 2013 Red
TGD 018 Code of practice for the installation and inspection of fire resisting duct systems 2014 Green
TGD 019 Fire resistance test for 'open-state' cavity barriers used in the external envelope or fabric of buildings 2014 Green
TGN 001 Spray coatings for fire protection of concrete floors. Technical guidance note for the use of sprayed man made mineral wool to the requirements of BS 8110 Part 2 1992 Red
TGN 002 Spray coatings for the fire protection of structural steel. Technical guidance note for the mechanical retention of sprayed mineral coatings based upon the requirements of BS 8202 Part 1 1994 Red
TGN 003:P1 On site measurement of intumescent coatings - Part 1 Technical Guidance Note for the measurement of dry film thickness (dft's) for intumescent coatings 1996 Red
TGN 004 Fire protection of roof components of portal framed buildings and secondary structural steelwork 1996 Red
TGN 005 Guide to class 0 and class 1 1996 Red
TGN 006 Structural steel fire protection using intumescent coating systems in conjunction with: existing paint layers: zinc rich primers 1998 Red
TGN 007 On site guidance note for the specification and use of site applied intumescent coating systems 2001 Red
TGN 008 Guidance on the junction between different fire protection systems when applied to load bearing structural steel elements 2008 Red
TGN 009 Guidance note for the fire protection of steel beams with web openings 2008 Red
TGN 010 Guidance note for the refurbishment and upgrading of fire protection of structural steelwork 2008 Red
TGN 011 Code of practice for the specification and on-site installation of intumescent coatings 2008 Red
TGN 011 Code of practice for the specification and on-site installation of intumescent coatings for fire protection of structural steelwork 2009 Red
TGN 013 Code of practice for the over-cladding of reactive coatings when used as fire protection to steel structural sections 2008 Red

 

Page 1 of 1

Document Status Indicators

Green The Green document status indicator indicates that the document is:
  • (a) current in the Construction Information Service and
  • (b) the latest version - ie it does not have any other documents that replace or amend it and is promoted as a current document by the publisher.
Amber The Amber document status indicator indicates that some caution is needed when using this document - it is either:
  • (a) current in the Construction Information Service but has a document or documents that replace or amend it, so please look at the "Newer Versions" tab or
  • (b) not in the Construction Information Service but with another reason why it may be relevant to our customers such as being cited in NBS or in the Building Regulations Approved Documents. Again there may be more recent versions of the document.
Red The Red document status indicator indicates that the document is an old version
  • The document has likely been withdrawn by the publisher, also the meta data presented here may be out of date as it is no longer being maintained by the editorial teams at NBS.