American Society for Testing and Materials

100 Barr Harbor Drive
PO Box C700
West Conshohocken
PA 19428-2959
USA
Website: https://www.astm.org/
Email: service@astm.org
Tel: +1 610 832-9500

Documents by this publisher

Page 1 of 1

Series details Title Year Status
ASTM A240/A240M-17 Standard specification for chromium and chromium-nickel stainless steel plate, sheet, and strip for pressure vessels and for general applications 2017 Amber
ASTM A276/A276M-17 Standard specification for stainless steel bars and shapes 2017 Amber
ASTM A312/A312M-16a Standard specification for seamless, welded, and heavily cold worked austenitic stainless steel pipes 2016 Amber
ASTM A312/A312M-17 Standard specification for seamless, welded, and heavily cold worked austenitic stainless steel pipes 2017 Amber
ASTM A484/A484M-16 Standard specification for general requirements for stainless steel bars, billets, and forgings 2016 Amber
ASTM A555/A555M-16 Standard specification for general requirements for stainless steel wire and wire rods 2016 Amber
ASTM A580/A580M-18 Standard specification for stainless steel wire 2018 Amber
ASTM A581/A581M-95b Standard specification for free-machining stainless steel wire and wire rods 1995 Amber
ASTM A820/A820M-06 Standard specification for steel fibres for fibre-reinforced concrete 2006 Amber
ASTM A820/A820M-16 Standard specification for steel fibres for fibre-reinforced concrete 2016 Amber
ASTM A955/A955M-18 Standard specification for deformed and plain stainless steel bars for concrete reinforcement 2018 Amber
ASTM A1016/A1016M-17a Standard specification for general requirements for ferritic alloy steel, austenitic alloy steel, and stainless steel tubes 2017 Amber
ASTM A1022/A1022M-16b Standard specification for deformed and plain stainless steel wire and welded wire for concrete reinforcement 2016 Amber
ASTM C270-12 Standard specification for mortar for unit masonry 2012 Red
ASTM C270-14 Standard specification for mortar for unit masonry 2014 Red
ASTM C270-14a Standard specification for mortar for unit masonry 2014 Amber
ASTM C295/C295M-12 Standard guide for petrographic examination of aggregates for concrete 2012 Amber
ASTM C509-06 Standard specification for elastomeric cellular preformed gasket and sealing material (2006) 2006 Amber
ASTM C615/C615M-11 Standard specification for granite dimension stone 2011 Amber
ASTM C666/C666M-03 Standard test method for resistance of concrete to rapid freezing and thawing 2003 Red
ASTM C666/C666M-08 Standard test method for resistance of concrete to rapid freezing and thawing 2008 Amber
ASTM C666/C666M-15 Standard test method for resistance of concrete to rapid freezing and thawing 2015 Amber
ASTM C672/C672M-03 Standard test method for scaling resistance of concrete surfaces exposed to de-icing chemicals 2003 Amber
ASTM C672/C672M-12 Standard test method for scaling resistance of concrete surfaces exposed to deicing chemicals 2012 Amber
ASTM C847-14a Standard specification for metal lath 2014 Amber
ASTM C1063-17a Standard specification for installation of lathing and furring to receive interior and exterior portland cement-based plaster 2017 Amber
ASTM C1087-00 Standard test method for determining compatibility of liquid-applied sealants with accessories used in structural glazing systems 2000 Amber
ASTM C1087-16 Standard test method for determining compatibility of liquid-applied sealants with accessories used in structural glazing systems 2016 Amber
ASTM C1260-05a Standard test method for potential alkali reactivity of aggregates (mortar-bar method) 2005 Amber
ASTM C1260-07 Standard test method for potential alkali reactivity of aggregates (mortar-bar method) 2007 Red
ASTM C1260-14 Standard test method for potential alkali reactivity of aggregates (mortar-bar method) 2014 Amber
ASTM C1330-02 Standard specification for cylindrical sealant backing for use with cold liquid-applied sealants 2002 Amber
ASTM D178-01 Standard specification for rubber insulating matting 2001 Amber
ASTM D523-08 Standard test method for specular gloss 2008 Amber
ASTM D523-14 Standard test method for specular gloss 2014 Amber
ASTM D523-89 Standard test method for specular gloss 1989 Red
ASTM D2047-04 Standard test method for static coefficient of friction of polish-coated flooring surfaces as measured by the James machine 2004 Amber
ASTM D2047-11 Standard test method for static coefficient of friction of polish-coated flooring surfaces as measured by the James machine 2011 Amber
ASTM D4355/D4355M-14 Standard test method for deterioration of geotextiles by exposure to light, moisture and heat in a xenon arc type apparatus 2014 Amber
ASTM D4491/D4491M-17 Standard test methods for water permeability of geotextiles by permittivity 2017 Amber
ASTM D4945-08 Standard test method for high-strain dynamic testing of piles 2008 Amber
ASTM D4945-17 Standard test method for high-strain dynamic testing of deep foundations 2017 Amber
ASTM D5893/D5893M-16 Standard specification for cold applied, single component, chemically curing silicone joint sealant for portland cement concrete pavements 2016 Amber
ASTM D5957-98 Standard guide for flood testing horizontal waterproofing installations 1998 Amber
ASTM E283-04 Standard test method for determining rate of air leakage through exterior windows, curtain walls, and doors under specified pressure differences across the specimen 2004 Amber
ASTM E424-71 Standard test methods for solar energy transmittance and reflectance (terrestrial) of sheet materials 1971 Amber
ASTM E903-12 Standard test method for solar absorptance, reflectance, and transmittance of materials using integrating spheres 2012 Amber
ASTM E1414/E1414M-16 Standard test method for airborne sound attenuation between rooms sharing a common ceiling plenum 2016 Amber
ASTM E2396/E2396M-15 Standard test method for saturated water permeability of granular drainage media [falling head method] for vegetative (green) roof systems 2015 Amber
ASTM E2397/E2397M-15 Standard practice for determination of dead loads and live loads associated with vegetative (green) roof systems 2015 Amber
ASTM E2398/E2398M-15a Standard test method for water capture and media retention of geocomposite drain layers for vegetative (green) roof systems 2015 Amber
ASTM E2399/E2399M-15 Standard test method for maximum media density for dead load analysis of vegetative (green) roof systems 2015 Amber
ASTM E2400/E2400M-06 Standard guide for selection, installation, and maintenance of plants for green roof systems 2006 Amber
ASTM E2777-14 Standard guide for vegetative (green) roof systems 2014 Amber
ASTM E2788-11 Standard specification for use of expanded shale, clay and slate (ESCS) as a mineral component in the growing media and the drainage layer for vegetative (green) roof systems 2011 Amber
ASTM E779-10 Standard test method for determining air leakage rate by fan pressurization 2010 Amber
ASTM F436/F436M-16 Standard specification for hardened steel washers. Inch and metric dimensions 2016 Amber
ASTM F437-15 Standard specification for threaded chlorinated poly (vinyl chloride) (CPVC) plastic pipe fittings, schedule 80 2015 Amber
ASTM F438-17 Standard specification for socket-type chlorinated poly (vinyl chloride) (CPVC) plastic pipe fittings, schedule 40 2017 Amber
ASTM F439-13 Standard specification for chlorinated poly (vinyl chloride) (CPVC) plastic pipe fittings, schedule 80 2013 Amber
ASTM F442/F442M-13e1 Standard specification for chlorinated poly (vinyl chloride) (CPVC) plastic pipe (SDR–PR) 2013 Amber
STP 0996 Special Technical Publication. New stone technology, design and construction for exterior wall systems. B Donaldson, Ed. 1988 Amber
STP 1054 Special Technical Publication. Science and technology of glazing systems 1989 Amber

 

Page 1 of 1

Document Status Indicators

Green The Green document status indicator indicates that the document is:
  • (a) current in the Construction Information Service and
  • (b) the latest version - ie it does not have any other documents that replace or amend it and is promoted as a current document by the publisher.
Amber The Amber document status indicator indicates that some caution is needed when using this document - it is either:
  • (a) current in the Construction Information Service but has a document or documents that replace or amend it, so please look at the "Newer Versions" tab or
  • (b) not in the Construction Information Service but with another reason why it may be relevant to our customers such as being cited in NBS or in the Building Regulations Approved Documents. Again there may be more recent versions of the document.
Red The Red document status indicator indicates that the document is an old version
  • The document has likely been withdrawn by the publisher, also the meta data presented here may be out of date as it is no longer being maintained by the editorial teams at NBS.