Government lags behind construction industry in commitment to sustainability

Government lags behind construction industry in commitment to sustainability

Oct 7, 2014 |NBS |2 Minute Read

Press Release
7 October 2014

The Government needs to take a stronger lead on sustainability according to the latest Sustainability Report published by NBS.


The survey, which was completed prior to David Cameron’s recent pledge to build 100,000 new homes exempt for the zero carbon homes standard, found that almost half of the industry (48%) believes that all new buildings should be zero carbon.

Almost three-quarters of respondents, which included consultants, clients and contractors, support significant increases in public spending to make existing building stock more sustainable, with less than a third agreeing that “the Government is on the right track with sustainability”.

Specific demands included the removal of VAT on refurbishment projects and the introduction of grants for sustainable retrofit.

With regards to legislation, the recent changes to Part L were generally welcomed with 68% of those taking part believing they will help the industry make progress towards the design and construction of zero carbon homes and buildings and 65% saying they will ensure thermal efficiency standards are met. That said, a significant number (46%) do not think Part L goes far enough.


The industry’s commitment to sustainability is without question, with 91%, 89% and 80% of respondents rating environmental, economic and social sustainability respectively as important or very important.

In contrast, only 13% said that sustainability targets were ‘always’ achieved on projects, although a further 40% did report that it was ‘usually’ the case.

At the same time, there has been a small fall in people’s confidence in their knowledge and skills around sustainability with only 9% feeling ‘very confident’ against 12% in 2012 and 21% feeling ‘not very’ or ‘not at all’ confident up from 15% in the previous survey. This might, the report suggests, be down to the perception of complex and frequently changing legislation.


"This report is being published at a particularly interesting time as the various political parties make commitments ahead of next year's election, many of which will impact on our industry. With buildings accounting for around 40% of total energy consumption in the EU, and more if embodied energy is included, we should not underestimate the impact we can have on the sustainability of the way we live.

"Our survey uncovers deep commitment to improvement, and suggests some ways that we can bring it about. But there is still a great deal of progress to be made if we are to meet our 2050 emissions targets. At NBS, we will continue to chart that progress, and through our design tools we will continue to provide design knowledge to support it.
"

Richard Waterhouse, Chief Executive, RIBA Enterprises

"What this survey has made clear is that there is a deep level of personal and professional commitment in the construction industry to creating sustainable buildings. There are frustrations, around fragmented and contradictory standards and guidance and a desire for the Government to take a greater lead and tighten up statutory requirements rather than loosening them. It will be fascinating to see what emerges from the next survey in 2016."

Adrian Malleson, Head of Research, NBS

Sustainability is one of the four streams at Digital Thinking, Smart Building, a major industry conference with speakers covering topics including new metrics for sustainability and off-site construction as a sustainable alternative.

Related resources

Download the free NBS Sustainability Report 2014 (.pdf, 2.9Mb)

Download the free NBS Sustainability Report 2014 infographic (.pdf, 4.3Mb)

Our latest news

Visqueen supports one of the first Gateway 2 approvals under the Building Safety Act

The Dyecoats development in Leeds marks a major milestone for the UK housing sector. The £100 million flagship Latimer Homes scheme being delivered by GRAHAM is one of the first high-rise new-build projects in the country to achieve Building Safety Act Gateway 2 approval, a crucial pre-construction sign-off confirming that the design meets all safety and regulatory requirements before work begins on site.

Building Safety ActSponsored

Five questions to ask when specifying insulated panels

Selecting an insulated panel system for an industrial building should start with the building and application requirements.

Design and SpecificationSponsored

NBS and BDP join forces to improve generic carbon data in construction

Today, NBS (part of Hubexo), the platform for connected construction information, announces a long-term strategic partnership with BDP, a major global multidisciplinary practice of architects, designers, engineers and urbanists. The partnership recognises BDP's integral role in the development of NBS LCA, a new life-cycle carbon assessment platform providing professionals with high-quality, reliable and easy-to-use carbon data to ensure accurate tracking as construction projects evolve. BDP's primary contribution to NBS LCA has been the development of more than 1,300 pre-calculated generic assemblies, covering the most commonly used building fabric elements alongside key concrete and steel structural elements. These assemblies provide whole-element carbon data, giving designers consistent, UK-relevant carbon benchmarks from the earliest stages of project design. Users can easily and instantly apply carbon rates to a range of pre-configured common building elements, including walls, floors, and roofs. Developed by BDP and NBS, the assemblies remove the need for designers to manually build up material layers or calculate individual components at the concept stage. This saves significant time and effort, enabling proportionate and responsible carbon evaluation early in the design process, when decisions have the greatest impact on a project's overall carbon footprint. BDP also participated in collaborative workshops that directly informed the development of NBS LCA, helping to shape a tool that is practical, accessible and aligned with real-world UK construction workflows. Dr Lee Jones, Head of Sustainability at Hubexo, said: “BDP's contribution to NBS LCA has been invaluable. Their depth of project experience and technical knowledge has directly shaped the generic assemblies at the heart of the platform. These assemblies give designers a reliable, UK-relevant starting point for carbon assessment, without the burden of building everything from scratch. This is exactly the kind of collaboration that moves the industry forward, and we're proud to be working with BDP on a long-term basis.” Julia Yao, Associate, Sustainability Consultant at BDP, said: “Carbon assessment needs to be embedded in design from day one, not bolted on at the end. Working with NBS to develop its LCA product has been a genuine opportunity to put that principle into practice. The generic assemblies we developed draw on real project data and are designed to give designers meaningful, actionable carbon information at the concept stage. We're delighted to see them at the core of a platform that will be used across the industry.” With the UK Government outlining its commitment to responsible carbon reporting through its Carbon Budget and Growth Delivery Plan, professionals need reliable, easy-to-use tools to assess and report embodied carbon. NBS LCA addresses this need by integrating carbon calculations with live design work, drawing on structured data from Circular Ecology's ICE Database and more than 12,500 verified, specification-ready construction products with Environmental Product Declarations (EPDs) from NBS Source and ECO Portal. Over the coming months, NBS and BDP will continue to develop their partnership, with a shared commitment to improving the quality and accessibility of carbon data for construction professionals across the UK. NBS LCA is available now, with flexible subscriptions designed for all professionals. For more information, visit the website here.

Product update