BRE study provides hot data on cool air trends

BRE study provides hot data on cool air trends

Jul 26, 2016 |Richard McPartland

A new BRE report sheds important light on electricity usage by air conditioning in UK offices and retail environments.

The study - commissioned by the Department of Energy and Climate Change (DECC) - now part of the Department of Business, Energy and Industrial Strategy externallink- has taken two years to complete and the resulting report provides key insights into how the energy is being used and the factors influencing consumption.

The aim of the study was to improve the DECC's understanding of UK electricity usage by air-conditioning (AC) in UK non-domestic buildings. Led by Dr Andy Lewry, BRE's principal consultant, in the sustainable energy team, the study included analysing existing cooling demand and consumption data; assessing air conditioning inspection reports and energy performance certificates; reviewing literature on trends in air conditioning usage and the possible future impacts of new technology; and developing procedures to extend the scope of DECC’s product policy model.

With the research informing objectives ranging from estimating the potential for energy efficiency to how uptake of energy-efficient appliances can be accelerated, the main findings and outcomes include:

  • Cooling in air conditioning systems may account for around a 10th of total UK electricity consumption.
  • Heatwaves are becoming more frequent across the UK and in the South-East of England, the number of heatwave days per year increased from five in 1961 to 17 in 2003.

  • The proportion of buildings with air-conditioning is increasing. The study estimates that that, in 2012, some 65% of UK office space and 30% of UK retail space was air-conditioned.

  • The study estimates that cooling in offices typically uses around 40 kWh/m2 per year.

  • Air conditioning is frequently used even when buildings are unoccupied, for example in the evenings and over the weekends.

  • The analysis of Energy Performance Certificates (EPCs) indicates that over half of air conditioning systems in the UK are split systems. Although only 10% of EPCs have AC recommendations; these mostly relate to more efficient equipment, including variable speed drives, and reducing air leakage from ductwork.

  • An analysis of the recommendations in air conditioning inspection reports, which tend to be generic with the focus on improving controls and maintenance.

  • Recommendations for updating the key inputs into DECC's existing product policy model of air conditioning electricity demand and development of an algorithm to estimate peak and monthly demand to supplement it.

BRE has also put together a dissemination plan aimed specifically at air-conditioning designers and technicians, building managers and smart system designers

You can download the full report, New Insights into air conditioning in the UK, for free, from BRE's website externallink

Our latest articles

Visqueen launches Ultimate Self Adhesive Membrane for hydrocarbon and VOC-contaminated sites

The construction industry faces growing challenges when building on increasingly complex brownfield sites. Alongside the need for effective waterproofing, developers and contractors must now address a wider range of ground contaminants, including hydrocarbons, volatile organic compounds (VOCs), and hazardous ground gases, while maintaining programme efficiency and installation quality. Against this backdrop, Visqueen has expanded its gas protection and waterproofing portfolio with the launch of Visqueen Ultimate Self Adhesive Membrane, a new hydrocarbon and VOC-resistant self-adhesive tanking membrane. Developed as the latest addition to the Visqueen non-foil gas barrier range, the new membrane combines proven gas barrier and waterproofing performance to help specifiers address multiple site challenges with a single solution.

Construction ProductsSponsored

Siderise: Helping to bridge the gap between Gateway 2 approval and on-site fire protection

While the new building safety regime hasn’t fundamentally changed what requirements higher-risk buildings (HRBs) must meet to comply with the Building Regulations, it has significantly increased the breadth, depth and volume of evidence that must be supplied to demonstrate this. As a result, project teams have had to adapt the way they work and even look beyond their roles to understand how their actions may impact the next Dutyholder in the chain. For specifiers, this can include considering what supporting services are offered with life safety-critical elements to enable correct design, installation and maintenance. Early engagement with manufacturer technical specialists can help identify any practical challenges that may arise onsite. Then, during construction, these services can help support the translation of design intent into reality so that buildings are safe for occupation.

Construction ProductsSponsored

RIBA CPD for Architects: Understanding Flooring Specification and Detailing

For architects and specifiers, flooring details can have a significant impact on the safety, accessibility, durability and overall performance of a building. Yet the technical considerations surrounding stairways, floor transitions, and floor finishes are not always straightforward.

RIBA CPDSponsored