Book a demo
Standards and Regulations Video

Building Regulations Explained - Part F and J

Jul 17, 2011 |NBS

The Building Regulations Approved Document F: ‘Ventilation’ and Part J: ‘Combustion appliances and fuel storage systems’ have been amended.

From October 2010, Approved Document J requires energy reduction at source, carbon monoxide alarms and more detail on biomass boilers. Part F stipulates the importance of ventilating increasingly airtight buildings.

Presented by the main authors of the Approved Documents and other leading experts in the field, this programme explains the most important issues and examines various ways to comply.

About the contributors

Compliance (Ventilation vs Heat Loss)
David Ross, Regional Director, AECOM

The Parts Explained (Air Flows, Combustion and Health)
Mark Crowther, General Manager, GASTEC at CRE

Calculating the Effects (Passive Ventilation)
David Ross, Regional Director, AECOM

What do Building Inspectors Expect?
Geoff Wilkinson, Vice Chair, Building Control & Standards Faculty, CIOB; Building Regs columnist, Architects’ Journal


RIBA CPDDisclaimer: NBS TV programmes are the intellectual property of RIBA Enterprises and it shall be a breach of this right to copy, or in any way exploit commercially or show in public any of the programmes without the express permission of RIBA Enterprises.
The information contained in the programmes is not intended and accordingly shall not be relied upon either as a substitute for professional advice or judgement or to provide legal or other advice with respect to any particular circumstance. RIBA Enterprises accepts no responsibility for loss occasioned to any person acting or refraining from action as a result of the information contained in the programmes.
 

Our latest articles

All articles

Designing sustainability into construction – proof over promises in sustainable construction

With tightening regulations and growing client demand, the construction industry is under increasing pressure to demonstrate measurable progress against carbon reduction targets. For specifiers, that means ensuring every product installed stands up to scrutiny, not just in material, but in source, traceability, and lifetime carbon footprint. JELD-WEN, a specialist timber door, door kit and doorset manufacturer, explains the critical considerations when selecting sustainable materials.

Sponsored

Dulux Trade launches new solution for high-humidity spaces

Because of how they are used, kitchens and bathrooms experience more moisture, more contact, and more ongoing maintenance. Standard emulsions are not designed for this level of use. Over time, finishes can lose their appearance or fail to cope with the environment. Kitchens and bathrooms benefit best using a product formulated specifically for their daily demands.

Construction ProductsSponsored

The hidden cost of compliance: why architects are demanding a new era of product transparency

Few pieces of legislation have reshaped the UK construction industry as significantly as the Building Safety Act 2022 (BSA). Introduced to improve accountability, traceability and safety standards across the built environment, the legislation has fundamentally changed the responsibilities placed on architects, contractors and manufacturers. While the principles behind the Act are widely supported, the reality for architectural practices is proving more challenging than many anticipated.